How to mount USB attached HDD using ntfs-3g instead ufsd?
How to mount USB attached HDD using ntfs-3g instead ufsd at startup? I've installed entware and see that ntfs-3g present into it. But I can't understand how to change automount settings.
View ArticleChange default routing on an Cisco SG300 switch
I want to build a high speed router VLAN with one device the router so there is no slow downs from other devices in the same VLAN. Some devices get chatty. My switch is in layer 3 mode. I just noticed...
View ArticleNaming clients
This is so frustrating and is something new, at least to me. I have named many of the clients that use my network (through my RT-N66U). So, when I log in to the web interface I can see who is using the...
View ArticleNeed some advice please
Hi love snb as we always get great info and advice. Anyway here is the advice I need from you guys, I have a 3 story home and the walls are old build so WiFi is a challenge, so I have a Asus Rt AC87U...
View ArticleOverclock to stick after reboot?
I was wondering what settings I need to do on my AC5300 to keep the overclock settings to stick? I telnet command the following: nvram set clkfreq=1600,800 nvram commit Then when I reboot no matter...
View ArticleBlock access to wan subnet
Hi guys and Merry Christmas to all! I just bought the RC-AC5300 and installed Asuswrt-merlin. Then I enabled one guest network on 2.4Ghz (from the ifconfig output, i'm guessing wl0.1 is the guest). My...
View ArticleInterference on 2.4 GHz and 5 GHz
I had a lot of interference on my IP supplied 2.4 GHz router, so I bought a dual band Linksys model. Now I am having interference on the 5 GHz band. There is a cell phone tower across the street from...
View ArticleWake On WAN From More Than A Computer Using Script.
Hello all again. I've been testing the script commented here and it works perfect, thank you!: https://github.com/RMerl/asuswrt-merlin/wiki/WOL-Script-Wake-Up-Your-Webserver-On-Internet-Traffic This...
View ArticleAC87U - MacBook disconnected, coming out of sleep
When my MacBook Air wakes from sleep it shows the wifi as connected to my 5 GHz network. But no traffic is flowing. The only way to restore traffic is by turning off wifi, and back on. Then everything...
View ArticleTL-R600VPN custom firmware?
Does anyone know if custom firmware is available for the TL-R600VPN? Looking for something that is a little more feature rich like DD-WRT.
View ArticleRT-AC3200 & HDD (same as RT-87U & HDD)
I am very new to this forum. This may have been discussed here, but I was not able to find it. I have a RT-AC3200 running 380.57, and configured as FTP server. A HDD (WD 3T External) connected to the...
View ArticleMerlin traffic meter per device does not work
first off, Hi everyone this is Woomera, been reading and watching this forum for the past week since i found out about merlin firmware and now facing my first issue i decided to post up and ask for...
View ArticleAnyone using 380.57/AC88U/Astrill Plug-in?
Does this combination work? If so are there any pitfalls, issues, problems? Thanks for any replies.
View ArticleProblem Nat xbox one
good , I tried this new firmware 380.57 on my ac87u to start all goes well, the problem is when I use xboxone , which tells me that I have moderate NAT , UPnP does not work well , then reconfigured the...
View ArticleAsus RT-AC68U won't OC
Hi Folks, I hope you all are doing fine after Christmas! I have a question with regards to my AC68U router running Merlin 380.57. It simply won't OC. What I have done is I tried both SSH and Telnet...
View ArticleOccasional no response from DNS server when Dual WAN is on
Hi, I am in the middle of switching my ISP and figured that this is a perfect time to try out the Dual WAN feature. Everything is running smoothly, but I have noticed that occasionally after typing in...
View ArticleDNS in Dual WAN
I've been trying to get Dual WAN up in failover mode on my RT-68U for some time now (now running 380.57). Periodically I am getting DNS failures. I have a DSL connection as my primary and Comcast as my...
View ArticleClik here to view.
Overclock Merlin on v378.56 and beyond
Season's greetings to all tinkers and overclockers. The following guide was in response to a request in one thread a while back....
View ArticlePPTP VPN shows address of 0.0.0.0?
I have had VPN working before, but it was an older version and I updated recently. Now I set it up as before, but can't connect. I looked at the status page for VPN PPTP and see 0.0.0.0 (pic attached)....
View ArticleRT-AC87U, dual wan balancing + OpenVPN?
I have RT-AC87U with Merlin built 380.57, set up as the router. Dual WAN (both DSL from different ISPs setup on WAN port and Lan4), balancing In order to use VPN, I have setup the following routing...
View Article