LACP Config for 2x WAN Connections - RT-AC68U
Hi all, Not even sure this is possible, but I'll ask anyway. As the title suggests, is it possible to configure LACP within the RT-AC68U to use 2 WAN connections? In my case, they are both FTTH....
View ArticleClik here to view.
Channel bandwidth connecting problems?
Hey. I was wondering if on 5ghz i use 80mhz channel bandwidth , then i try to connect from devices that can connect at max 40mhz bandwidth on 5ghz.. Will it connect? Or not? Thx cuz on 2.4ghz even if i...
View ArticleWifi Devices frequently dropped from LAN
arp -a MyQ-40F.XX.asuscommm.com (192.168.8.112) at <incomplete> on br0 thermostat.XX.asuscommm.com (192.168.8.113) at XX:YY:ZZ:72:ca:3a [ether] on br0 These two devices are frequently offline for...
View Articlelet's encrypt in Merlin
it is possible let's encrypt in Merlin . Then you could always have a valid certificate.
View ArticleJust Had DSL Problems, Could My 68U Problem Have Been Related
I just went through 3 days of problems, on the phone with ISP, trying changes on my LAN, etc., and finally found that there was something wrong with the carrier's (Bell) hardware. Last month I tried...
View Articlereliable single-bay NAS instead of 2-bay NAS?
I want to get my first NAS. It will be used for music streaming to my SONOS system and also possibly storing pics. Video streaming may be a future option. I have no interest in RAID and plan on adding...
View ArticleRT-AC68U DHCPREQUEST(br0) DHCPACK(br0) ???
I've just completely defaulted my RT-AC68U due to numerous disconnection issues with any firmware since 3004-378-4585. I've also used the Merlin 380.57 version and getting some strange log events,...
View ArticleNeed to replace R7000 that died, Advice needed...
Guys, I have a Netgear R7000 that has served me well the last 2 years in both my townhouse and now my bigger single family home. I get pretty good coverage throughout the house, I have the router in...
View ArticleRT-AC68U DHCPREQUEST(br0) DHCPACK(br0) ???
I've just completely defaulted my RT-AC68U due to numerous disconnection issues with any firmware since 3004-378-4585. I've also used the Merlin 380.57 version and getting some strange log events,...
View ArticleAccess to WAN modem when WAN is down
My AC-68U has IP address 192.168.1.1, the usual subnet, and connects to internet via DSL modem Speedstream 5100 having IP 192.168.0.1, configured as a bridge. When everything is up and running, I can...
View ArticleSIP Dual Wan 378.56 and 378.56_2
I have a Asus Rt-AC66W configured as a dual wan in load balance mode; Primary is Cable and Secondary is Verizon DSl PPPoE. The configuration is both WAN connections are active all the time and there is...
View ArticleCan't Manually Assign IP via DHCP List
All, Here's my problem; When I try to manually assign IPs to my devices, like my NAS, it doesn't stick. For example; I manually assign the NAS to 192.168.1.100 via its MAC address. But when I click...
View ArticleDouble NAT
Security "expert" Steve Gibson has been on TWiT podcast with Leo Laporte advocating dual NAT networks as providing greater security. Any opinions or experiences?
View ArticleQoS problems
I have had difficulty searching for solution as QoS is too short and returns search error. I have RT-AC68 running Merlin 380.57 The QoS function seems to work intermittently at best. Recently setup...
View ArticleExpressVPN and Stock Asus OpenVPN
Having wrapped myself in knots seeing if I could make StrongVPN run on stock Asus firmware (no, AFAIK), I learn that StrongVPN may no longer be the best vendor for me. ExpressVPN is currently getting...
View ArticleUse Merlin for WiFiPresence
I am looking for a way to trigger an IFTTT Maker channel request depending on WiFi presence (i.e., whether a device is connected to the router). I browsed around the forum and found a post that looks...
View ArticleHelp with ASUS RT-AC68U router
Hello all, First of all, I just want to share that I am a amateur when it comes to networking and router setup. So please forgive me if I asked questions that are silly or irrelevant. So let me begin....
View Articlealert mail: AiProtection send mail
Hi, I have AiProtection enabled but I do not use the Infected Device Prevention and Blocking utility in the router (thus I have entered no email address). If I didn't have this enabled, then why would...
View ArticleNETGEAR QoS problems
Okay So I have an R6250 thats only a few months old, this ALSO happens on the R7000. But Upload QoS enabled just so that when uploading on my 2Mbps upload cable connection to keep my pings down. Well...
View Articlefwknop questions
Trying to play with the fwknop Entware NG package (port knocking single packet authorization- see demo ) and have some questions: 1. After Quick Start (generate keys, fill .conf file) service started...
View Article