I have two Engenius 2610 devices, one is set as an access point, the other as a client bridge to bridge about 1/2 mile to another building. While trying to track down other problems I realized that I had the IP addresses of both Engenius devices set to 192.168.1.1, which is also the IP address of my router. Thinking that I had, perhaps, found the source of other nagging problems I changed the IP addresses of the Engenius devices to 192.168.1.247 and 248, both outside of the DHCP range....
Engenius 2610 Bridge Problem
Engenius 2610 Bridge Problem