Hey guys,
Upgraded to Merlin 378.56_2 from 378.51 and my previous overclock of 1200/800 (that would stick upon reboot) is upon installation of the firmware through the GUI tool.
The bootloader says: Bootloader (CFE): 1.0.2.0
I did not change CFE. I did not do a factory reset.
Now I telnet to the rtr and try and set the same overclock but it will not stick.
nvram set clkfreq=1200,800
nvram commit
reboot
upong rebooting, the values are back to 800/666.
nvram get clkfreq...
RT-AC68U: Upgraded to Merlin 378.56_2. Overclock is now volatile
Upgraded to Merlin 378.56_2 from 378.51 and my previous overclock of 1200/800 (that would stick upon reboot) is upon installation of the firmware through the GUI tool.
The bootloader says: Bootloader (CFE): 1.0.2.0
I did not change CFE. I did not do a factory reset.
Now I telnet to the rtr and try and set the same overclock but it will not stick.
nvram set clkfreq=1200,800
nvram commit
reboot
upong rebooting, the values are back to 800/666.
nvram get clkfreq...
RT-AC68U: Upgraded to Merlin 378.56_2. Overclock is now volatile